Skip to content

Arduino CLI

burn-bootloader

arduino/arduino-cli

burn-bootloader

arduino-cli burn-bootloader¶

Upload the bootloader.

Synopsis¶

Upload the bootloader on the board using an external programmer.

arduino-cli burn-bootloader [flags]

Examples¶

  arduino-cli burn-bootloader -b arduino:avr:uno -P atmel_ice

Options¶

      --board-options strings         List of board options separated by commas. Or can be used multiple times for multiple options.
      --discovery-timeout duration    Max time to wait for port discovery, e.g.: 30s, 1m (default 1s)
  -b, --fqbn string                   Fully Qualified Board Name, e.g.: arduino:avr:uno
  -h, --help                          help for burn-bootloader
  -p, --port string                   Upload port address, e.g.: COM3 or /dev/ttyACM2
  -P, --programmer string             Programmer to use, e.g: atmel_ice
  -l, --protocol string               Upload port protocol, e.g: serial
      --upload-property stringArray   Override an upload property with a custom value. Can be used multiple times for multiple properties.
  -v, --verbose                       Turns on verbose mode.
  -t, --verify                        Verify uploaded binary after the upload.

Options inherited from parent commands¶

      --additional-urls strings   Comma-separated list of additional URLs for the Boards Manager.
      --config-dir string         Sets the default data directory (Arduino CLI will look for configuration file in this directory).
      --config-file string        The custom config file (if not specified the default will be used).
      --json                      Print the output in JSON format.
      --log                       Print the logs on the standard output.
      --log-file string           Path to the file where logs will be written.
      --log-format string         The output format for the logs, can be: text, json (default "text")
      --log-level string          Messages with this level and above will be logged. Valid levels are: trace, debug, info, warn, error, fatal, panic (default "info")
      --no-color                  Disable colored output.

SEE ALSO¶

arduino-cli - Arduino CLI.