Skip to content

Arduino CLI

board attach

arduino/arduino-cli

board attach

arduino-cli board attach¶

Attaches a sketch to a board.

Synopsis¶

Sets the default values for port and FQBN. If no port, FQBN or programmer are specified, the current default port, FQBN and programmer are displayed.

arduino-cli board attach [-p <port>] [-b <FQBN>] [-P <programmer>] [sketchPath] [flags]

Examples¶

  arduino-cli board attach -p /dev/ttyACM0
  arduino-cli board attach -p /dev/ttyACM0 HelloWorld
  arduino-cli board attach -b arduino:samd:mkr1000  arduino-cli board attach -P atmel_ice

Options¶

      --board-options strings        List of board options separated by commas. Or can be used multiple times for multiple options.
      --discovery-timeout duration   Max time to wait for port discovery, e.g.: 30s, 1m (default 1s)
  -b, --fqbn string                  Fully Qualified Board Name, e.g.: arduino:avr:uno
  -h, --help                         help for attach
  -p, --port string                  Upload port address, e.g.: COM3 or /dev/ttyACM2
  -P, --programmer string            Programmer to use, e.g: atmel_ice
  -l, --protocol string              Upload port protocol, e.g: serial

Options inherited from parent commands¶

      --additional-urls strings   Comma-separated list of additional URLs for the Boards Manager.
      --config-dir string         Sets the default data directory (Arduino CLI will look for configuration file in this directory).
      --config-file string        The custom config file (if not specified the default will be used).
      --json                      Print the output in JSON format.
      --log                       Print the logs on the standard output.
      --log-file string           Path to the file where logs will be written.
      --log-format string         The output format for the logs, can be: text, json (default "text")
      --log-level string          Messages with this level and above will be logged. Valid levels are: trace, debug, info, warn, error, fatal, panic (default "info")
      --no-color                  Disable colored output.

SEE ALSO¶

arduino-cli board - Arduino board commands.